APPLICATION FOR TRAP TYPE APPROVAL 

	

		
		
Application form for trap type approval 

Use this form to apply for trap type approval. Here we have compiled what information is needed. The information is an important basis for the Swedish Environmental Protection Agency's decision. Please note that the case may be delayed if all handling is not included in the application. Applying for type approval costs SEK 2,900 per trap. 

Fill in the form, sign and send to:

Naturvårdsverket
106 48 Stockholm
Sweden

You can email the application to registrator@naturvardsverket.se. Applications sent by email must be printed, signed and scanned. 

 The following appendices must always be attached to the application:

•	Photo and a construction drawing of the trap in its entirety, also from the inside with the construction of the trigger device. Photos / drawings must be of high quality.

•	A material and construction specification according to the specification attached below. Use the specialist terms accepted by the specialist trade in the specification.

•	User-friendly instructions on how to handle and set the trap to ensure the selectivity and safety of the trap.

The following must be attached to the application, if applicable:

•	Documentation of completed tests in accordance with the Swedish Environmental Protection Agency's regulations (NFS 2013:13) on trap type approval.

You must also be able to provide a number of copies of the trap.

Applicant
Name:	     	
Social security-/organisational number	     	
Address:	     	
Postal address:	     	
Phone:	     	
Email:	     	

Manufacturer (if other than applicant))
Name:	     	
Address:	     	
Postal address:	     	
Phone:	     	
Email:	     	

Species
For which species is the trap intended for?
     	

Unnecessary suffering
In what way is it ensured that the trap does not expose unnecessary suffering for the trapped species?	

     	

Selectivity

How is selectivity ensured, ie that only the species for which the trap is intended are for are captured?	

     	

Security
 
How has the safety of humans and domestic animals been taken care of?	

     	

Conditions for use
Under what conditions should the trap be used? For example, in which environment, biotope, geographical part of the country, etc.	

     	

Marking
Where on the trap can the user mark it with name and telephone number in a weather-resistant way?	

     	

Appendix - material specification
Name which material the current part consists of. For example, type of wood, type of metal or plywood. Also enter relevant dimensions such as width, length and thickness for specified materials. Also specify how the composition is designed by specifying dimensions and materials for, for example, studs, rods, screws or nails.

Long sides	     	
Gables 	     	
Floor	     	
Ceiling	     	
Entrance opening	     	
Trigger device	     	

Appendix - Design specification
Briefly specify how the construction is to be designed. 
Size - rectangular / square traps 

Enter the total length, width, height and the number of square meters that the trap occupies in area	

     	

Size – circular traps

Enter the total length, width, height and the number of square meters that the trap occupies in area	

     	

Composition inside

Indicate whether there are protruding or sharp parts in the catchment area, such as bolt heads, slats, joists or beams. If there are surfaces inside the catch space that consist of metal, indicate in such cases whether these surfaces are painted.	

     	

Ventilation

Describe the design of the ventilation.	

     	

Floor construction

Indicate if the floor is non-slip and in such cases in which way. 	

     	

Design of entrance opening

Describe the design of the entrance opening, for example a trapdoor or spring-loaded gates, etc. In the case where the trap has a trapdoor, the weight, width, length and thickness must be specified. Furthermore, the maximum height of the drop door at the upright position must be stated.	

     	

Size of entrance opening

Enter the size and width of the entrance opening. If the entrance opening can be adjusted, set the smallest possible size to the highest, both in terms of height and width. In the case of an adjustable entrance opening, state whether the size of the entrance opening can be fixed and, in such cases, how. 	

     	

Killing hatch

If applicable, describe the design of the killing hatch. Also specify whether the door can be arranged so that it cannot be opened from the inside. 	

     	

Safety hatch

If applicable, describe the design of the safety hatch or emergency exit.	

     	

Inspection hatch

If applicable, describe the design of the inspection hatch. Also specify whether the door can be arranged so that it can be opened from the inside.. 	

     	

     	

Place and date		Signature	
		     	
		Name clarification